Safety Technology International

Step 1

Choose Shell Color

Red

Green

Yellow

White

Blue

Step 2

Choose Protective Cover

*	For surface mount applications the 10271 Adaptor plate may be required if backbox is less than 2 1/2" deep. No labeling can be placed on Bopper Stopper cover.

No Cover

Bopper Stopper Cover (no alarm)*

Mini Stopper II Cover w/o Horn

Mini Stopper II Cover with Horn

Mini Weather Stopper Cover

Mini Weather Stopper Cover with Spacer

Mini Stopper II Cover w/o Horn with Spacer

Mini Stopper II Cover with Horn and Spacer

Step 3

Choose Type of Button/Switch Activation

Octagonal Button (Push-to-Activate, Key to Reset)

Note: Buttons 0, 1, 3, 4 may require spacer
#SUB-102722 (color) to accommodate depth or a deep single-gang box.

Push and Turn-to-Reset

Push and Key-to-Reset Octagon Button

Key-to-Activate

Momentary Mushroom

Momentary Mushroom Octagon Button

Momentary Touch Button (No UL Listing)

Illuminated Mushroom (red or green)
Note: Green housing has green illuminated button. All others have a red illuminated button.

Pneumatic Adjustable Timer Button

Push, Turn-to-Reset Octagon Button

Step 4

Raised Molded Standard Message
The following messages are available only on color indicated. All colors can be custom labeled to your specifications. (See box below)

MESSAGE		AVAILABLE ON
F	"FIRE"	Red Shell
E	"EMERGENCY"	Red Shell
PS	"FUEL PUMP SHUT-DOWN"	Red Shell
X	"EXIT"	Green Shell
EX	"EMERGENCY EXIT"	Green Shell
E	"EMERGENCY"	Blue Shell
EX	"EMERGENCY EXIT"	Blue Shell
PS	"FUEL PUMP SHUTDOWN"	Yellow Shell
PO	"EMERGENCY POWER OFF"	Yellow Shell
PO	"EMERGENCY POWER OFF"	White Shell
N	No Label	All Shells
C	Custom Label (fill in box below)	All Shells and Covers 3-8

- OR -

Custom Label*

Custom Label for shell: 2 Lines / 10 characters each (includes spaces)

Custom Label for cover: 2 Lines / 20 characters each includes spaces)

*There is an additional charge for custom labels.

* NOTE: No labeling can be placed on the Bopper Stopper Cover.

Step 5

Determine Part Number

Determine numbers from steps 1-4 above and fill out the part number steps to the right.

Your Stopper Station Part Number:		STEP 1	STEP 2	STEP 3	STEP 4
Part Number	SS-2

Example:
A red Stopper Station [0], with No Cover [0], a Push and Turn-to-Reset button [1], and "Emergency" Raised Molded message would be part number SS-2001E.

Your Stopper Station Part Number:		STEP 1	STEP 2	STEP 3	STEP 4
Part Number	SS-2	0	0	1	E

Step 6

Contact Us

Please call STI toll free (800-888-4784) or your local distributor after completing the worksheet to order the Stopper Station that is right for your needs.

Last Updated: 05/13/2008 8:28 AM